28
Menu settings
Use this menu to change the telephone system settings.
Press MENU/SELECT when in idle mode (when the console is not in use) toconsole is not in use) to is not in use) to
enter the main menu.
Press or to scroll to the feature to be changed. Theto scroll to the feature to be changed. The > symbol indicates
the selected menu item.
Press MENU/SELECT or /SKIP to select the menu item.
Press CANCEL to exit setup without making changes.
NOTE: Press CANCEL to cancel an operation, exit the menu display, or return to idle mode.
Ringer volume
Use this feature to set the ringer volume to one of the six levels or turn the
ringer off. When the ringer is off, the icon appears on the console screen.
The console stores the volume setting for all lines.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ringer setting, then press MENU/SELECT or
/SKIP.
Press MENU/SELECT or /SKIP again to select Ringer volume.
Press , , or +/VOL/-/VOL/- on the console to adjust the ringer volume.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
-OR-
When the console is idle, press +/VOL/-/VOL/- to adjust the ringer volume, then press
MENU/SELECT to save.
NOTE: The ringer volume also determines the ringer volume for intercom calls. If the console
ringer volume is set to off, it is silenced for all incoming calls, including intercom calls.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Settings
Console setup
To Next Page
Loading...
Need help?
General
