23
3. Release PTT after speaking. Both
devices beep once again. After the
devices beep, you can press and
hold PTT to continue speaking or the
destination device can respond (see
Answer a PTT call on page 23).
4. Press on the handset or press
CANCEL on the telephone base to
end the PTT call. The handset or
telephone base display Push to talk
Ended for a few seconds.
-OR-
Place the handset in the telephone
base or charger to end the PTT call.
PTT call to a multiple devices
When there are multiple handsets
registered to the telephone system,
PTT supports one-to-group calls. PTT
supports a maximum of one-to-five
calls when one to five handsets are
registered, and a maximum of one-to-
four calls when six or more handsets
are registered. The first four registered
handsets will be able to use this feature.
Other handsets can only use PTT for
one-to-one calls.
To begin a PTT call to multiple
devices:
Press and hold PTT until the
screen shows Connecting to all
handsets....
-OR-
Press PTT. Press or to
choose All handsets. Press
SELECT or press PTT and your
device shows Connecting to all
handsets....
-OR-
Press PTT. Press TONE followed
by # (pound key). The screen
shows Connecting to all
handsets....
1.
•
•
•
When the connection is made, both
the caller and the destination parties
hear a beep. The speakerphones
on all other devices automatically
activate.
2. You need to press and hold PTT
when you want to speak. Speak
towards your device. Your voice is
broadcast to all devices.
3. Release PTT after speaking. After
the devices beep, you can press and
hold PTT to continue speaking or the
destination device can respond (see
Answer a PTT call below).
4. Press on the handset or press
CANCEL on the telephone base to
end the PTT call. The handset or
telephone base display Push to talk
Ended for a few seconds.
-OR-
Place the handset in the telephone
base or charger to end the PTT call.
To Next Page
Loading...
Need help?
General
