VTech DS5151-2 User Manual

44
NOTES
If you do not press any keys after you
enter the remote access code, all new
messages play. If there are no new
messages, all old messages play.
Once the new messages have played,
the telephone announces the help menu
options. If you do not press any key
within 20 seconds, the remote access call
automatically disconnects.
When the answering system memory is
full, the telephone announces, “Memory is
full. Enter the remote access code.”
When the answering system is off, the
telephone answers after 10 rings, and
announces, “Please enter your remote
access code.”
Set your remote access code
You can set your own remote access
code from 00 to 99.
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to Ans sys
setup, then press SELECT.
Press or to scroll to Remote
code, then press SELECT.
Press or , or use the dialing keys
(0-9) to enter a two-digit number.
Press DELETE on the handset or on
the telephone base to backspace
and delete a digit.
Press SELECT to save and you hear
a confirmation tone.
•
•
•
•
1.
2.
3.
4.
5.
6.
Call screening
To screen a call at the telephone
base:
If the answering system and call
screening are on, the announcement
and the incoming message broadcast
at the telephone base while the call is
answered by the answering system.
Options while a message is being
recorded:
Press /VOLUME/ on the telephone
base to adjust the call screening
volume.
Press /PLAY/STOP or CANCEL to
temporarily silence the call screening.
Press /PLAY/STOP to temporarily
turn on the call screening if call
screening is set to off.
Press to answer the call.
To screen a call at a handset:
If the answering system is on and
your answering system is recording a
message, the handset shows To screen
call, press [SELECT]. Press SELECT to
screen the call.
Options while a message is being
recorded:
Press /VOLUME/ on the handset to
adjust the call screening volume.
Press to temporarily silence
the call screening.
Press SELECT on the handset to
temporarily turn on the call screening if
call screening is set to off.
Press on the handset to turn off
the speakerphone and screen the call
through the handset earpiece. Press
again to turn on the speakerphone.
•
•
•
•
•
•
•
•

VTech DS5151-2 Specifications

General

Brand	VTech
Model	DS5151-2
Category	Cordless Telephone
Language	English