VTech DS5151-2 User Manual

39
Press or to scroll to Reset annc,
then press SELECT. The screen
shows Reset to default annc?.
Press SELECT again. The screen
displays Annc. reset to default.
NOTE
When your announcement is deleted,
calls are answered with the default
announcement.
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or select toll saver.
If you choose toll saver, the answering
system answers a call after two rings
if you have new messages, or after
four rings when there are no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges
when you are calling from outside your
local area. By default, the answering
system answers an incoming call after
four rings.
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to Ans sys
setup, then press SELECT.
Press or to scroll to # of rings,
then press SELECT.
Press or to select 2, 3, 4, 5, 6 or
Toll saver.
Press SELECT to save and you hear
a confirmation tone.
NOTES
If you subscribe to voicemail service from
your telephone service provider, see
Answering system and voicemail.
If you have muted the first ring, you will
hear one ring less before the answering
system answers the incoming calls.
4.
5.
•
1.
2.
3.
4.
5.
6.
•
•
Set recording time
You can set the recording time allowed
for each incoming message. The
message length is three minutes
by default.
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to Ans sys
setup, then press SELECT.
Press or to scroll to Recording
time, then press SELECT.
Press or to select 3 minutes,
2 minutes or 1 minute.
Press SELECT to save and you hear
a confirmation tone.
Turn the call screening on or off
You can hear incoming messages at
the telephone base while they are being
recorded.
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to Ans sys
setup, then press SELECT.
Press SELECT to select Call
screening.
Press or to select On or Off.
Press SELECT to save and you hear
a confirmation tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.

VTech DS5151-2 Specifications

General

Brand	VTech
Model	DS5151-2
Category	Cordless Telephone
Language	English