28
While entering names and
numbers, you can:
Press DELETE to backspace and
erase a digit or character.
Press and hold DELETE to erase the
entire entry.
Press or to move the cursor to the
left or right.
Press and hold PAUSE to insert a
dialing pause (for entering numbers
only).
Press 0 to add a space (for entering
names only).
Press TONE to change the next
letter to upper or lower case.
Delete a directory entry
Search for the desired entry in the
directory (see Review a directory
entry or Alphabetical search).
When the desired entry appears,
press DELETE on the handset or
telephone base. The screen displays
Delete contact? with the telephone
number.
Press SELECT to confirm. You hear
a confirmation tone.
•
•
•
•
•
•
1.
2.
3.
Speed dial
You can copy up to nine directory entries
into the speed dial locations (0 and 2-9)
so that you can dial these numbers more
quickly.
The speed dial memory locations are
stored at the telephone base and are
shared by all system devices. Changes
made to the speed dial entries on one
system device apply to all.
Assign a speed dial number
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll toto scroll to Directory,
then press SELECT.
Press or to scroll toto scroll to Speed dial,
then press SELECT.
Press , or a dialing key (0 or 2-9)
to choose the desired speed dial
location.
Press SELECT. The screen displays
Copy from Directory... and then the
first entry in the directory.
Press or to scroll to desired
entry.
Press SELECT to save your selection.
You hear a confirmation tone.
-OR-
When the telephone is idle, press
and hold any dialing key (0 or 2-9).
Press or to choose your desired
speed dial location (0 or 2-9), then
press SELECT. The screen brieflyThe screen briefly
shows Copy from Directory... and
then displays the directory list.
Press or to scroll to the phone
number you wish to assign to the
selected speed dial location.
Press SELECT to save your selection.
You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.