VTech DS5151-2 User Manual

37
Category
Built-in
answering
system
Voicemail
from
telephone
service
Method
to retrieve
messages
To retrieve
messages,
usually there
are two ways:
Press
/PLAY/STOP
on the
telephone
base; or
Access
remotely with
an access
code.
•
•
To retrieve
messages,
you need
an access
number
and/or a
password
provided
by your
telephone
service
provider.
Telephone base control key panel:
Set your built-in answering
system
The answering system can record
and store up to 99 messages. Each
message can be up to three minutes in
length. The total storage capacity for the
announcement, messages and memos
is approximately 23 minutes. The actual
recording time depends on individual
message characteristics.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to set
number of rings before pick up, to access
remotely, and to control the recording
time.
Turn the answering system on
or off
The answering system must be turned
on to answer and record messages.
When the answering system is turned
on, the /ANS ON/OFF light on the
telephone base turns on and ANS ON
displays on the handset.
To turn on or off with the
telephone base:
Press /ANS ON/OFF to turn the built-in
answering system on or off. When the
answering system is turned on, the base
announces, “Calls will be answered.”
When the answering system is turned
off, the base announces, “Calls will not
be answered.”
To turn on or off with the handset:
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to
Answer ON/OFF, then press
SELECT.
•
1.
2.
3.

VTech DS5151-2 Specifications

General

Brand	VTech
Model	DS5151-2
Category	Cordless Telephone
Language	English