VTech DS5151-2 User Manual

26
Directory
The directory can store up to 50 entries,
which are shared by all handsets and the
telephone base. Any modifications made
on one device apply to all. Each entry
may consist of a telephone number with
up to 30 digits and a name with up to 15
characters.
If the telephone number in the directory
exceeds 15 digits, <
*
appears in front of
the telephone number. Press TONE to
move towards the end of the telephone
number or press # (pound key) to move
towards the beginning of the telephone
number.
Only one system device can review
the directory at a time. When a device
tries to enter the directory while another
device is already in it, Not available at
this time appears.
Add a directory entry
Using a cordless handset or the
telephone base:
Enter the number when the phone is
not in use. Press MENU, then go to
Step 3.
-OR-
Press MENU when in idle mode.
Press or to scroll to
Directory, then press SELECT.
Press or to scroll to Add
contact, then press SELECT.
2. When ENTER NUMBER displays,
use the dialing keys to enter the
number.
-OR-
Copy a number from the redial list by
pressing REDIAL. Then press , or
REDIAL repeatedly to find the desired
number. Press SELECT to copy the
number.
1.
i.
ii.
iii.
3. Press SELECT to move on to the
name. The screen displays
ENTER NAME.
4. Use the dialing keys to enter the
name. Additional key presses show
other characters of that particular
key. The first character of each word
is capitalized.
5. Press SELECT to save. The screen
displays Saved and you hear a
confirmation tone.
-OR-
1. Use the dialing keys to enter a
number (up to 30 digits) on the
handset or on the telephone base
when it is not in use. Press SELECT
and then the screen displays ENTER
NUMBER.
-OR-
Copy a number from the redial list by
pressing REDIAL. Then press , or
REDIAL repeatedly to find the
desired number. Press SELECT to
copy the number.
2. Press SELECT to move on to the
name.
3. When ENTER NAME displays, use
the dialing keys to enter the name.
Additional key presses show other
characters of that particular key.
The first character of each word is
capitalized.
4. Press SELECT to save. The screen
displays Saved and you hear a
confirmation tone.
While entering names and
numbers, you can:
Press DELETE to backspace and
erase a digit or character.
Press and hold DELETE to erase the
entire entry.
Press or to move the cursor to the
left or right.
•
•
•

VTech DS5151-2 Specifications

General

Brand	VTech
Model	DS5151-2
Category	Cordless Telephone
Language	English