VTech DS5151-2 User Manual

38
Press or to scroll to On or Off,
then press SELECT to confirm. You
hear a confirmation tone.
NOTES
When you turn on the answering system
at the telephone base with no memory
capacity left, Rec mem full displays on the
handset and telephone base.
If the memory capacity is less than 3
minutes, the telephone announces, “Less
than three minutes to record.”
Default announcement
The telephone is preset with a greeting
that answers calls with, “Hello. Please
leave a message after the tone.” You
can use this preset announcement, or
replace it with your own.
Record your own announcement
The announcement can be up to 90
seconds in length.
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press SELECT again to select
Announcement.
Press SELECT to select Record annc.
The system announces, “Record after
the tone. Press 5 when you are done.”
After the tone, speak towards the
microphone.
Press 5 when done. The answering
system automatically plays back the
newly recorded announcement, then
returns to the previous menu.
-OR-
Press on the handset or
CANCEL on the telephone base to
return to the previous menu.
NOTE
Announcement shorter than two seconds
will not be recorded.
4.
•
•
1.
2.
3.
4.
5.
6.
•
Play your announcement
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press SELECT again to select
Announcement.
Press or to scroll to Play annc,
then press SELECT.
Options during playback:
Press /VOLUME/ on the handset or
on the telephone base to adjust the
listening volume.
Press 5 to stop playback.
Press on the handset to switch to
speakerphone mode.
Delete your announcement
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press SELECT again to select
Announcement.
Press or to scroll to Play annc,
then press SELECT.
While the announcement is
playing, press DELETE to delete
the announcement. The system
announces “Announcement deleted“
and the screen displays Annc.
deleted. You hear a long beep.
-OR-
Press MENU on the handset or the
telephone base when it is not in use.
Press or to scroll to Answering
sys, then press SELECT.
Press SELECT again to select
Announcement.
1.
2.
3.
4.
•
•
•
1.
2.
3.
4.
5.
1.
2.
3.

VTech DS5151-2 Specifications

General

Brand	VTech
Model	DS5151-2
Category	Cordless Telephone
Language	English