32
33
Make, answer or end a cell
call
The IS8128/IS8128-2/IS8128-3/IS8128-
4/IS8128-5/IS8128-11/IS8128-21/
IS8128-31/IS8128-41/IS8128-51 can be
used to make or answer calls on the cell
line. You can connect a maximum of two
Bluetooth enabled cell phones to the
telephone base.
Make a cell call
1. Press
CELL on the handset. The
handset displays Select a device.
-OR-
Press CELL on the telephone base.
The screen displays SELECT A DEVICE.
• If you have only one cell phone
connected to the telephone base,
press MENU/SELECT to select the
only device.
• If you have two cell phones
connected to the telephone,
press q CID or p to select
a cell phone and then press
MENU/SELECT.
2. Enter the telephone number on the
handset, then press
CELL to dial.
-OR-
Enter the telephone number on the
telephone base, then press CELL or
MENU/SELECT to dial.
Predial a cell call
1. Enter the telephone number.
2. Press
CELL on the handset to dial.
-OR-
Press CELL on the telephone base to
dial.
• If you have only one cell phone
connected to the telephone base,
it is automatically selected to make
cell calls.
• If you have two cell phones
connected to the telephone
base, the screen displays Select
a device. Press q CID or p to
select a cell phone and then press
MENU/SELECT.
Answer a cell call
• Press
CELL or on the handset.
-OR-
• Press CELL on the telephone base.
End a cell call
• Press OFF/CANCEL, or put the handset
in the telephone base or charger.
-OR-
• Press CELL on the telephone base.
NOTES
• The screen displays Unable to call if
your cell phone is in use.
• You can also use your cell phone to
answer the call. If you answer with
your cell phone, it disconnects from
the telephone base.
• The screen shows the elapsed time
as you talk (in hours, minutes and
seconds).
• When predialing (preview
numbers before dialing), press
MUTE/DELETE/VOICE on the
handset or telephone base to
backspace and delete; press and
hold REDIAL/PAUSE to insert a
dialing pause (a P appears).
• Make a cell call using the cell lines
of your telephone system instead
of using the remote voice control
feature, if you need to press dialing
keys (0-9, TONE or QUIET#) during
a call.
Call waiting on the home line
If you subscribe to call waiting service
from your telephone service provider,
and someone calls while you are already
on a call, the screen flashes , and you
hear a tone.
• Press HOME/FLASH on the
handset, or press FLASH on the
telephone base to put your current
call on hold and take the new call.
• Press HOME/FLASH on the
handset or press FLASH on the
telephone base at any time to switch
back and forth between calls.
NOTES
• If the Smart call blocker feature is
on and in screening mode, and you
receive a call waiting home call:
• If you have already picked up a
screened home call, the telephone
checks whether the call waiting
call’s number can be found in the
phonebook, block list or allow list.
It also checks whether the caller
name is in the star name list. After
that, the telephone displays the
caller ID information or Blocked
call accordingly. You can press
HOME/FLASH or to take
the new call.
• If the telephone is screening a
home call, the call waiting call will
be ignored and logged as missed
call in the caller ID log.
• The screening feature of Smart call
blocker is applicable to home calls
only.
To Next Page
Loading...
