VTech IS8128-11 - Delete a Phonebook Entry; Delete All Phonebook Entries; Redial List; Review a Redial List Entry

46
47
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
5. Press MENU/SELECT to save. The
handset shows the updated entry.
Delete a phonebook entry
1. While reviewing a phonebook entry,
press MUTE/DELETE/VOICE on the
handset. The screen shows Delete
entry?.
- OR -
While reviewing a phonebook entry,
press X/DELETE on the telephone
base. The screen shows Delete
contact? and the contact name.
2. Press MENU/SELECT to delete the
displayed entry from the phonebook.
The handset shows Deleting... and
then you hear a confirmation tone.
Once deleted, you cannot retrieve
that entry.
Delete all phonebook entries
1. Press MENU/SELECT on the handset
or telephone base when in idle mode.
2. Press q CID or p to scroll
to Phonebook, then press
MENU/SELECT.
3. Press q CID or p to scroll to Delete
all, then press MENU/SELECT.
4. The handset shows Delete all?.
Press MENU/SELECT to confirm. The
handset shows Deleting.... You hear a
confirmation tone.
- OR -
The telephone base shows Delete
all? Press MENU/SELECT to confirm.
The screen shows Deleted. You hear
a confirmation tone.
Redial list
Each handset stores the last 10 dialed
numbers (up to 30 digits each) in the
redial list. The list of dialed numbers
include both dialed home calls and cell
calls.
Review a redial list entry
1. Press REDIAL/PAUSE in idle mode.
2. Press q CID, p or
REDIAL/PAUSE repeatedly to
browse until the desired number
displays. The handset beeps twice at
the end of the list.
3. Press OFF/CANCEL on the handset
or CANCEL on the telephone base to
exit.
Redial a call from list
• When the desired redial entry
displays on the handset, press
HOME/FLASH or to dial
using the home line, or press
CELL to dial using the cell line.
- OR -
• When the desired redial entry
displays on the telephone base,
press HOME to dial using the
home line, or press CELL to dial
using the cell line.
- OR -
Using a cordless handset
1. Press HOME/FLASH or to use
the home line, or press CELL to use
the cell line.
2. Press REDIAL/PAUSE to enter the
redial list.
3. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
4. Press MENU/SELECT to dial the
displayed number.
Using the telephone base
1. Press HOME to use the home line, or
press CELL to use the cell line.
2. Press REDIAL/PAUSE to enter the
redial list.
3. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
4. Press MENU/SELECT to dial the
displayed number.