EasyManua.ls Logo

VTech IS8128-11 - Set Smart Call Blocker On;Off; Set Profile; Screen Unknown; Screen Robot

VTech IS8128-11
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
71
NOTE
You can set to screen, allow, or block
all unknown home calls without
numbers, or unknown home calls
with numbers not saved in your
phonebook, allow list or star name list.
You can also send these calls to the
answering system. Allow unknown is
the default profile setting. To change
the setting, see Set profile.
Set Smart call blocker on/off
The Smart call blocker feature is set to on
by default.
1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press MENU/SELECT again to select
SCB On/Off.
3. Press q CID or p to highlight On or
Off, then press MENU/SELECT to save
the setting. You hear a confirmation
tone.
NOTES
If you set SCB On/Off to Off, all
settings under Set profile (see below)
will be invalid.
Set profile
There are five profile setting options,
which allows you to quickly set up Smart
call blocker.
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Set
profile, then press MENU/SELECT.
3. Press q CID or p to select one
of the following options, then press
MENU/SELECT.
Screen unknown
Screen any home calls without
numbers or with numbers not saved
in the phonebook, allow list, or star
name list.
This profile setting sets the
telephone to screen all unknown
home calls and asks the callers to
say their names before putting the
calls through to you. See Screen
unknown home calls.
Screen robot
Screen robocalls.
- This profile setting sets the
telephone to screen all
unknown home calls and asks
the callers to press the pound
key (#) before putting the calls
through to you. See Screen
robocalls.
Allow unknown (default setting)
Allow all unknown home calls to ring,
except calls with numbers saved in
the block list.
- This profile setting sets the
telephone to allow all unknown
home calls to get through and
ring. Calls with numbers saved
in the block list will be rejected.
UnknownToAns.S
Forward all unknown home calls to
the answering system.
This profile setting sets the
telephone to forward all unknown
home calls to the answering
system.
Block unknown
Block all unknown home calls.
This profile setting sets the
telephone to block all unknown
home calls.
After selecting a profile setting, make
sure you have not turned off Smart call
blocker. Refer to the Set Smart call
blocker on/off section to it on.

Table of Contents

Related product manuals