78
79
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Edit an allow list entry
1. Search for the desired entry in the
block list (see Review allow list).
2. When the desired entry displays, press
MENU/SELECT. The screen displays
Enter number along with the phone
number to be edited. If you only want
to edit the name, skip to Step 4.
3. To edit the number:
• Use the dialing keys to enter digits.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
4. Press MENU/SELECT to move on to the
name. The screen shows Enter name
along with the name to be edited.
5. To edit the name:
• Use the dialing keys to enter
characters.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
6. Press MENU/SELECT to save the entry.
Delete an allow list entry
1. Search for the desired entry in the
allow list (see Review allow list).
2. When the desired entry displays, press
MUTE/DELETE/VOICE on the handset
or X/DELETE on the telephone base.
The screen shows Delete entry?.
3. Press MENU/SELECT to confirm. The
screen show Deleting... and then
you hear a confirmation tone. Once
deleted, you cannot retrieve that
entry.
Delete all allow list entries
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Allow
list, then press MENU/SELECT.
3. Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The handset shows Delete all?.
- OR -
Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The telephone base shows Delete
all in allow list?.
4. Press MENU/SELECT again to confirm.
The handset displays Deleting..., or
the telephone base displays Deleted.
There is a confirmation tone.
Star name list
There are many organizations like
schools, medical offices, and pharmacies
that use robocalls to communicate
important information to you. Robocall
uses an autodialer to deliver pre-
recorded messages. By entering the
name of the organizations into the star
name list, it ensures these calls will ring
through when you only know the caller
names but not their numbers.
If the first 15 characters of the incoming
caller ID’s name match a name saved in
your star name list, the call will get
through and ring. The star name list
stores up to 10 names.
Add a star name entry
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Star
name list, then press MENU/SELECT.
3. Press q CID or p to scroll
to Add new entry, then press
MENU/SELECT.
To Next Page
Loading...
