VTech IS8128-11 - Save a Redial Entry to the Phonebook; Delete a Redial List Entry; Chain Dialing; Access a Number from the Phonebook While on a Call

48
49
Save a redial entry to the phonebook
1. Press REDIAL/PAUSE on the handset
or telephone base in idle mode.
2. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired number displays.
3. Press MENU/SELECT twice.
4. The screen displays Enter number. Use
the dialing keys to edit the number, if
necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT.
6. The screen displays Enter name. Use
the dialing keys to enter a name (up to
15 characters). Press a key repeatedly
until the desired character shows on
the screen.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
7. Press MENU/SELECT. You hear a
confirmation tone.
Delete a redial list entry
1. Press REDIAL/PAUSE to enter the
redial list.
2. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
3. Press MUTE/DELETE/VOICE on the
handset or X/DELETE on the telephone
base to delete the displayed number.
You hear a confirmation tone.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial list
while you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the phonebook, caller ID log or redial
list.
Access a number from the phonebook
while on a call
1. Press MENU/SELECT.
2. Press MENU/SELECT to select
Phonebook .
3. Press q CID or p to scroll to
the desired entry or perform an
alphabetical search, then press
MENU/SELECT to dial the displayed
number.
Access a number from the caller ID log
while on a call
1. Press MENU/SELECT.
2. Press q CID or p to scroll to Caller
ID log, then press MENU/SELECT.
3. Press q CID or p to scroll
to the desired entry, then press
MENU/SELECT to dial the displayed
number.
Access a number from the redial list
while on a call
1. Press REDIAL/PAUSE.
2. Press q CID, p , or
REDIAL/PAUSE until the desired
number displays.
3. Press MENU/SELECT to dial the
displayed number.