74
75
Save a caller ID log entry to block list
1. Search for the desired caller ID log
entry (See Review the caller ID log).
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p to highlight To
Block list on the handset, or Block list
on the telephone base, and then press
MENU/SELECT. The screen displays
Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Edit a block list entry
1. Search for the desired entry in the
block list (see Review block list).
2. When the desired entry displays, press
MENU/SELECT. The screen displays
Enter number along with the phone
number to be edited. If you only want
to edit the name, skip to Step 4.
3. To edit the number:
• Use the dialing keys to enter digits.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
4. Press MENU/SELECT to move on to the
name. The screen shows Enter name
along with the name to be edited.
5. To edit the name:
• Use the dialing keys to enter
characters.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on
the telephone base to erase a
character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
6. Press MENU/SELECT to save the
entry.
Unblock a telephone number
1. Search for the desired entry in the
block list (see Review block list).
2. When the desired entry displays,
press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base. The screen shows
Delete entry?.
3. Press MENU/SELECT to confirm. The
screen show Deleting... and then
you hear a confirmation tone. Once
deleted, you cannot retrieve that
entry.
Delete all block list entries
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Block
list, then press MENU/SELECT.
3. Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The handset shows Delete all?.
- OR -
Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The telephone base shows Delete
all in block list?.
4. Press MENU/SELECT again to confirm.
The handset displays Deleting..., or
the telephone base displays Deleted.
There is a confirmation tone.
To Next Page
Loading...
