MEMORY CARD INSTALLATION
Kidizoom
®
Action Cam supports the below memory cards for memory
expansion.
The microSD and microSDHC logos are trademarks of SD-3C, LCC
microSD
microSDHC
• Make sure the camera is turned off.
• Locate the memory card slot at the side of the camera (near the OK
button
).
• Pull up the rubber cover.
• Insert the memory card (not included) as illustrated. Once the
memory card is detected and can be used, the memory card will
automatically be set as the default memory.
• To remove the memory card from the slot, push the card once and it
will eject.
Note:
• It is recommended to format your memory card before using it in the
Kidizoom
®
Action Cam.
• If a memory card is being used, data stored on the camera’s internal
memory cannot be seen until the card is removed. Make sure you
back up all important data from the memory card regularly.
MEMORY CARD INSTALLATION
To Next Page
Loading...
Need help?
General
