TO BEGIN USING
KIDIZOOM
®
ACTION CAM
Make sure the master power switch is in the 1 position and charge
the camera rst before using.
Note: It is not necessary to move the master power switch to off when
used daily.
Press the Home (On/Off) button
to turn the camera
on. When turning the camera on for the rst time, you
will need to set the date and time.
The left and right icons will appear on the item to be
adjusted. Press the left
or right buttons to change
the value, then press the OK button to conrm. Press
the left or right buttons again to move to adjust the
other items, or move to the OK icon and press the OK
button when you have nished.
After setting the date, the time setting screen will appear.
Set the time in the same fashion as before. When you
have nished, move to the OK icon and press the OK
button
to conrm.
Note: If the battery level is too low and cannot keep the
clock running, you will need to enter the time and date
again after recharging.
QUICK OPERATION GUIDE
Take Photos
Press the camera button to go to camera mode. In Camera mode,
press the OK button or the camera button to take a photo. Press
the left or right buttons to cycle through different photo effects.
Record Videos
Press the video button to go to the video mode. In Video mode,
press the OK button or the video button to start or stop the video
recording. Press the left or right buttons to cycle through different
video cartoon themes or effects.
Note: VTech recommends setting the screen to auto-off when the
camera is mounted for sports, such as on a bike or skateboard. Please
refer to the Settings section of this manual to enable the camera screen
auto-off function.
TO BEGIN USING KIDIZOOM
®
ACTION CAM
To Next Page
Loading...
Need help?
General
