KIDIZOOM
®
ACTION CAM
FREQUENTLY ASKED QUESTIONS
Question 1:
I have purchased a Kidizoom
®
Action Cam, but it will not work with
my PC, my PC is looking for a driver. I have searched the internet and
cannot nd a VTech
®
Kidizoom
®
Action Cam driver. What can I do?
Answer:
There is no separate driver needed for the Kidizoom
®
Action Cam. It
uses a standard USB mass storage device driver. Such a driver comes
standard on all Windows
®
operating systems starting with Windows
®
2000
Service Pack 3 (including Windows
®
XP, Vista and upwards) and Mac
OS
®
9.0 or above. If your computer meets these OS requirements and
is still looking for a driver, please contact your PC manufacturer for
further assistance. For earlier operating systems that do not support
mass storage, a system upgrade or mass storage device driver may be
available. Again, please check with your PC manufacturer.
Question 2:
What is the ISO value (light sensitivity) of the Kidizoom
®
Action Cam?
Answer:
The Kidizoom
®
Action Cam uses an auto-ISO value. It auto adjusts
the exposure time and light sensitivity depending on the lighting
environment.
Question 3:
My Kidizoom
®
Action Cam cannot be turned on.
Answer:
Please make sure the master power switch is on and the battery is
charged.
Question 4:
Why are my pictures sometimes grainy and fuzzy? Is there anything I
can do to improve the picture quality?
Answer:
In a poorly lit environment, the frame rate (shutter speed) drops to allow
for a longer exposure time. The downside of this is that any movement
in the frame, or of the hand holding the camera, can result in greater
blur. Furthermore, the camera sensor will soften the edges in low light
to counteract the darkness by reducing the image noise. This too can
sometimes result in a blurred picture. Try to improve the lighting to get
better results.
KIDIZOOM
®
ACTION CAM FAQ
To Next Page
Loading...
Need help?
General
