WABCO TP2205 - Fastening TRAILERCAST with Battery (when Bracket is not used); Direct Mounting Procedures; Critical Mounting Caution

22
Fastening TRAILERCAST with Battery (when Bracket is not used)
8 Fastening TRAILERCAST with Battery (when
Bracket is not used)
The installation of bracket is not required when no TPMS system is used.

TRAILERCAST with Battery unit.
When fastening TRAILERCAST with Battery on the vehicle (when bracket is not used), use 2 hexagon
head bolts M8 x 1.25, class 8.8 and tighten the bolts with a maximum torque of 25.4 Nm (dry).

fasten the TRAILERCAST with Battery device.
CAUTION
DO NOT DRILL INTO THE CHASSIS/FRAME OF THE TRAILER!