Wacker Neuson 28Z3 User Manual

1-12 OM 28Z3 US – Edition 2.0 * * 28Z3b110.fm
Introduction
Description
The CE mark means that the machine meets the requirements of the Machine Directive
and that the conformity procedure has been performed. The machine meets all the health
and safety requirements of the Machine Directive.
Location
On the type label
Description
Do not open engine cover before engine is stopped!
Do not touch any moving or turning parts!
Location
At the rear on the engine cover of the machine, in the engine compartment
Description
Do not touch hot surfaces, wait for parts to cool down.
Location
In the engine compartment
Description
Fill location for diesel fuel only.
Location
On the fuel tank
Description
Hydraulic oil reservoir. Use hydraulic fluid only.
– see chapter Adding hydraulic oil on page 5-18
Location
On the hydraulic oil reservoir
Description
Burn hazard. The tank is hot and under pressure!
Location
In the engine compartment on the partition wall on the right next to the battery master
switch, at the rear of the cab behind the hydraulic oil filler neck
Fig. 12: CE mark
Fig. 13: Prohibitory label
STOP
1000135230
Fig. 14: Hot surfaces
Fig. 15: Diesel
Fig. 16: Hydraulic oil
Fig. 17: Hydraulic oil reservoir under pressure

Wacker Neuson 28Z3 Specifications

General

Brand	Wacker Neuson
Model	28Z3
Category	Excavators
Language	English