BA ET18, 20, 24 en* 1.5 * et18_20_24e300.fm 3-21
Introduction 3
Meaning (ET18/ET20)
This label describes the pedal and control lever functions (control pattern
A/ISO controls).
Check before starting the machine the operating pattern that has been
chosen.
– see “ISO/SAE changeover” on page 3-20
Position
On the roof window on right in travel direction.
Fig. 41Function ET 18/ET 20 standard
Fig. 42Function ET 18/ET 20 auxiliary hydraulics/
proportional controls
Fig. 43Function ET 18/ET 20 Powertilt/3rd control
circuit
To Next Page
Loading...
