RD 12/RD 12A Safety Information
wc_si000302gb.fm 11
1.1.12 ALWAYS remain aware of changing positions and the movement of
other equipment and personnel on the job site.
1.1.13 ALWAYS remain seated and wear the seat belt at all times while
operating the machine.
1.1.14 ALWAYS remain aware of changing surface conditions and use extra
care when operating over uneven ground, on hills, or over soft or
coarse material. The machine could shift or slide unexpectedly.
1.1.15 ALWAYS use caution when operating the machine near the edges of
pits, trenches or platforms. Check to be sure that ground surface is
stable enough to support the weight of the machine with operator and
that there is no danger of the roller sliding, falling or tipping.
1.1.16 ALWAYS wear protective clothing appropriate to the job site when
operating the machine.
1.1.17 ALWAYS keep hands, feet, and loose clothing away from moving parts
of the machine.
1.1.18 Read, understand, and follow procedures in the Operator’s Manual
before attempting to operate the machine.
1.1.19 Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.
1.1.20 Always operate the machine with all safety devices and guards in
place and in working order.
1.1.21 ALWAYS be sure that all other persons are at a safe distance from the
machine. Stop the machine if people step into the working area of the
machine.