Spray System RD 12/RD 16
wc_tx000670gb.fm 64
8 Spray System
8.1 Troubleshooting the Spray System
Prerequisites
The machine must be able to start in order to troubleshoot the spray system. If the
machine does not start, see engine starting troubleshooting.
Components
The electrical components of the spray system consist of:
Pump
Pump timer module
Spray system switch
Sequence
When troubleshooting the spray system, do so in the following sequence:
1. Check power to the pump.
2. Check the pump timer module.
3. Check the spray system switch.
To Next Page
Loading...
