Wacker Neuson RD 12A Repair Manual

RD 12/RD 12A Disassembly & Assembly
wc_tx000671gb.fm 89
9.17 Removing the Exciter
Prerequisites  Front drum removed
Procedure Follow the procedure below to remove the exciter.
1. Remove the screws (a) that secure the drum support (b) to the shock mounts and
remove the drum support.
2. Mark (c) the position of the motor mount (d).
3. Remove the motor mount (d).
4. Remove the shock mount plate (e).
5. Mark the position (f) of the bearing housing.
6. Remove the bearing housing (g).
This procedure continues on the next page.
wc_gr004161
c
a
b
d
wc_gr004162
e
d
wc_gr004163
g
f

Wacker Neuson RD 12A Specifications

General

Brand	Wacker Neuson
Model	RD 12A
Category	Utility Vehicle
Language	English