EasyManuals Logo

Wacker Neuson RD 12A Repair Manual

Wacker Neuson RD 12A
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
RD 12/RD 12A Technical Data
wc_td000311gb.fm 131
11.5 Sound Measurements
The operating sound level, measured per the requirements of
Appendix 1, Paragraph 1.7.4.f of the EC-Machine Regulations, is:
the guaranteed sound power level (L
WA
):
RD 12 = 102 dB(A)
the sound pressure level at operator’s location (L
pA
):
RD 12 = 85.6 dB(A)
This sound value was determined according to ISO 3744 for the sound
power level (L
WA
).
11.6 Measurements of Operator Exposure to Vibration
The operator of this machine should expect to be exposed to vibration
levels listed below when using the machine in performance of its
normally intended function:
Maximum hand/arm vibration levels are:
RD 12 = 1.4 m/s
2
(4.6 ft/s
2
)
These are the representative values of the weighted root mean
square (rms) acceleration to which the hands and arms are
subjected. These weighted rms values are measured according
to ISO 5349-1.
Whole body vibration levels do not exceed:
RD 12 = 0.22 m/s
2
(0.7 ft/s
2
)
These are the representative values of the weighted root mean
square (rms) acceleration to which the whole body is subjected.
These weighted rms values are measured according to ISO
2631-1.
The results are compliant to the limit and action vibration values (hand/
arm and whole body) as specified in European directive 2002/44/EC.

Table of Contents

Other manuals for Wacker Neuson RD 12A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson RD 12A and is the answer not in the manual?

Wacker Neuson RD 12A Specifications

General IconGeneral
BrandWacker Neuson
ModelRD 12A
CategoryUtility Vehicle
LanguageEnglish

Related product manuals