Wacker Neuson RD 12A Repair Manual

RD 12/RD 12A Disassembly & Assembly
wc_tx000671gb.fm 117
Continued from the previous page.
5. Disconnect the fuel sensor (e) from the wiring harness.
6. Remove the gas strut brackets (f) from the water tank and the fuel tank. Remove the
cable clip (g).
7. Remove the mounting plate (h) from the water tank and the fuel tank, and pull the fuel
tank from the platform.
The procedure to remove the fuel tank is now complete.

Wacker Neuson RD 12A Specifications

General

Brand	Wacker Neuson
Model	RD 12A
Category	Utility Vehicle
Language	English