WACOM DTU-1031X User Manual

26
26
Interactive pen display
Index
Index
Contents
Contents
CUSTOMIZING PEN MODE AND OPTIONS
Select the PEN tab to change the functions assigned to the switch and tip of your pen.
.
Select the functions to perform
when pressing the pen switch.
When you bring the pen tip within
5 mm (0.2 inch) of the pen display
screen surface without touching
the screen and press the pen
switch, the selected function
occurs.
Tip
: To make double-clicking
easier, set the switch to
double-click automatically
by selecting D
OUBLE CLICK.
Double-click here to change the function
assigned to the pen tip.
Note: The tip must be set to C
LICK in
order to draw in most graphics
applications.
You can change the S
IDE SWITCH MODE to best
fit the way you like to use the pen when making
right-clicks or other click functions.
To access the S
IDE SWITCH MODE settings, click
on the O
PTIONS... button at the bottom of the
main Control Panel. In the O
PTIONS dialog box:
•Select H
OVER CLICK to perform click
functions without touching the pen tip to
the pen display screen surface.
• When C
LICK & TAP is selected, you must
press the pen switch while touching the
pen tip to the pen display screen surface in
order to perform a click function. C
LICK &
T
AP enables the precise placement of your
click functions, and is the default setting for
Tablet PCs.
• Choose Right or Left for right-handed or
left-handed orientation.
• On the DTU-1031X, use the Brightness
Adjustment slider to set your preferred
brightness for the screen.
• On the DTU-1141, adjust the brightness
with the brightness control in the
DisplayLink control panel.

WACOM DTU-1031X Specifications

General

Brand	WACOM
Model	DTU-1031X
Category	Interactive whiteboard
Language	English