WACOM DTU-1031X - Using and Customizing the Radial Menu

32
32
Interactive pen display
Index
Index
Contents
Contents
USING AND CUSTOMIZING THE RADIAL MENU
To display the Radial Menu, set the pen switch or ExpressKey to the RADIAL MENU function (this is the
default for ExpressKey 1). Whenever you press the switch or ExpressKey, the Radial Menu is displayed at
the screen cursor position.
• The hierarchical Radial Menu appears in circular
format. Each level of the menu consists of eight
control slices which may contain various features
and options to choose from.
• Select an available option by clicking on it within
the Radial Menu. Some selections may display a
submenu for additional options. Note: The menu
closes after you make a selection.
• To close the Radial Menu without making a
selection, click on the ‘X’ located at the center of
the menu or on a control slice that has no
function assigned to it.
Use the R
ADIAL MENU tab to customize the available functions on the Radial Menu.
1. Select a control slice.
2. Assign a control FUNCTION to
the slice.
3. Select a menu or submenu to
customize.
4. Select a control slice for which
to customize settings.
5. Choose the function(s) to
perform.
Top menu
Submenu