WAGNER CONTROL 150 M - Long-Term Storage Preparation; Preparing the Sprayer for Long-Term Storage; Gun Storage and Conservation

32
Control 150 M
GB
Preparing the sprayer for longterm storage
1) Make sure you have already completed the Cleanup
steps on pages 29-30.
2) Remove the inlet lter. You may need to use a screwdriver
to pry it loose.
Inlet
lter
3) Pour approximately 60 ml of light household oil into
the inlet valve.
HOUSEHOLD
OIL
4) Remove hose from outlet valve, place a rag over the
outlet valve, and turn the switch ON. Let the unit run
for ve seconds.
l
5) Switch the pump OFF.
O
6) Reinstall the inlet lter and press the button on the lter.
Button
7) Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint.
8) Replace the high pressure hose to the outlet valve and
replace the hopper lid.
STORAGE
Storage/Conservation of the gun
1) Unclip the trigger guard from the lter housing by
pulling outward from the lter housing.
2) Unscrew the housing.
3) Turn the gun over and ll with a few drops of oil.
HOUSEHOLD
OIL
4) Reassemble the gun.