WAGNER EPG-SPRINT - Description; Fields of Application, Correct Use

17
EPG-SPRINT / EPG-SPRINT X
SERVICE MANUAL
VERSION 09/2017 ORDER NUMBER DOC2309350
5 DESCRIPTION
5.1 FIELDS OF APPLICATION, CORRECT USE
The EPG-SPRINT/EPG-SPRINT X/EPG-SPRINT XE control unit can be used as a stand-alone
unit in manual coating systems or can be used, together with other units, in a PrimaTech/
Pro Tech M automatic system.
– When a Corona gun is connected, Corona current scale and the high-voltage supply
and control unit are active.
– When a Tribo gun is connected, the Tribo current scale is activated, while the high-
voltage supply and control unit are deactivated.
The control unit recognizes if a manual or automatic spray gun is connected. If an automatic
gun is connected, the control unit can only be controlled using the higher-level remote
control.
Incorrect use!
Risk of injury and damage to the device.
Only connect original WAGNER spray guns to the EPG-SPRINT/
EPG-SPRINT X/EPG-SPRINT XE control unit.
The PEM-C3R and PEM-T3R manual spray guns may not be
connected to the EPG-SPRINT/EPG-SPRINT X/EPG-SPRINT XE
control unit.
WARNING