WANHAO I3 Plus - Filament; Filament Types

Setup
3. Filament
The WANHAO 3D Printer uses high quality PLA and ABS laments. Only use quality
WANHAO laments as using generic laments may damage your 3D Printer, affect the
print quality and may void your warranty. Extra lament including multiple colours
and types are available from the online store at id.aliexpress.com/store/120824
For beginners, we recommend using PLA materials as they are easy to print and does not
produce fumes when printing. Before using other types of laments, ensure you understand the
advantages and disadvantages of other laments and their proper usage.
3.1 Filament Types
Filament Type PLA ABS PVA HIPS
Extruder Temp: 195ºC 210ºC 185ºC 220ºC
Heat Bed Temp 60ºC 90ºC 50ºC 60ºC
Ofcial Name: Polyactic Acid Acrylonitrile
Butadiene Styrene
Polyvinylv Alcohol High Impact
Polystyrene
Printing Level: Basic Advanced Advanced Advanced
Advantages: • Bioplastic
• Non-Toxic
• Less warping
issues
• Hard or soft/
exible variants
• High print
speed
• Smooth nish
• Durable
• Ideal for
mechanical
parts
• Water soluble
• Non-Toxic
• Lightweight
• Cost effective
• Dissolvable in
Limonene
Disadvantages: • Low heat
resistance
• Easier to break
than ABS
• Requires
thicker walls
than ABS
• Petroleumbased
• Nonbiodegradable
• Heated Print
Bed required
• Fumes when
printing
• Sunlight
deterioration
Finishing: • Sanding
possible
• Limited gluing
• Easy sanding
• Easily soluble in
acetone
• Gluing Only • Gluing Only
• Sensitive to
high heat.
Do not heat
over 190
• Only available
in white
AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator I3 Plus
27