Wansview W2 - Play;Stop Video

IP Camera W2(1080P)/W3(720P)
26
3.1.2
Manually add camera (suitable for outside network)
3.2.1
Play Video
3.2 Play/Stop Video
1) Tap to add camera
2) Manually input the camera informaon.
Tips: DID number can be checked from sckers on the back of the camera. You can
check the DID from Wansview app If you have already added the camera on the
mobile phone “wansview” app.
3) Hit “Add”.
4) “Save Success” will appear, click “OK” to close the dialog.
When the camera is connected, double-click the camera or right-click and choose “Play”
to play the video.