Wansview W2 - Alarm - Motion and Audio Detection

IP Camera W2(1080P)/W3(720P)
56
5.4.5 Alarm - Moon and Audio Detecon
Security > IP Filtering
This screen allows for the filtering
of IP addresses, either blocking
them or granng them access to
the camera.
This feature helps make the
camera more secure by liming
remote access only to approved
users. Below is a Screen shot of the
IP Filtering screen.
Security > Mask Area (not available for MAC users)
Users exclude up to 4 areas from
monitoring.
Click Start Seng and check the
windows.
Alarm > IO Detector (disabled in this model)
Camera allows user to add an
external source of alert (moon
sensor or push buon). We
recommend the Instar IN-500 PIR
Sensor as external moon sensor.
The external sensor can be always
open or always close. Please check
your alarm device seng in the
user guide.