Wansview W2 - Page 50

IP Camera W2(1080P)/W3(720P)
50
Network > Port seng
At "Port Seng", the user can
change web access port (hp
port). Port seng range:
80-65535. Pay aenon not to
conflict with other port values.
Network > Wi-Fi seng
At "Wi-Fi Set Up", click "Search"
and start up "Wi-Fi". Choose the
wireless router to be connected.
Input the password to connect to
the router. Click Save to complete
Wi-Fi Configuraon. Aer
compleng the configuraon,
click Test to confirm whether it is
connected to the wireless router.
Network > UPNP seng
If the user wants to view the
camera through the internet, the
router and camera UPNP port
forwarding funcon need to be
turned on.
Before auto port mapping, please
ensure your router supports UPNP
and has been enabled.