2004919_i•en•2017-09-01
We reserve the right to make technical changes
10
WMS WebControl
4 Commissioning
4.1 Commissioning via the
WMS studio software
A comfortable method of loading new projects to the WMS WebControl is
made available by the WMS studio software as of version 2.0.0 (see the
"WMS studio software" software manual, art. no. 890396). You will require an
SD card with the format FAT32.
4.2 Commissioning using
the browser
If you have an existing WMS network, commission the WMS WebControl by
following these 4 steps:
1.
Add the WMS WebControl to the WMS network.
See Chapter
4.3
2.
Start the WMS WebControl in your browser.
The WMS WebControl interface appears.
Enter the password and set the time.
In the "Configuration" menu item,
create rooms, followed by channels and scenes.
See Chapter
4.4
3.
Assign the WMS channels in the "Configura-
tion" menu item.
See Chapter
5.5
4.
Connect the WMS WebControl with the app.
See Chapter
11
You have successfully commissioned the unit.
Commissioning
To Next Page
Loading...
Need help?
General
