2004919_i•en•2017-09-01
We reserve the right to make technical changes
18
WMS WebControl
5.4 Creating scenes
The WMS WebControl enables you to comfortably store frequently occurring
room situations in "scenes".
Open the "Configuration" menu and select the room (in this example, the
kitchen) for which you would like to store a scene.
Fig. 12 Creating a scene
Click on to the right of "Channel".
You can select the "scene" in the pop-up window.
Place checkmarks next to the channels that you would like to group in a
scene.
Accept your selection with the "Create" button.
Never use the same scene number for different transmitters (e.g. WMS Hand-
held transmitter and WMS WebControl) in combination with the same plug
receivers (you would overwrite the first scene).
If you have already created scenes in another project, begin numbering the
scenes from the end, i.e. backwards from 31, to avoid overlaps.
Fig. 13 The created scene is marked with a red line.
Configuration
To Next Page
Loading...
Need help?
General
