EasyManua.ls Logo

Wartsila 46DF - Page 78

Wartsila 46DF
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.1.2.4 Heavy fuel oil operation (residual)
The fuel specification “HFO 2” is based on the ISO 8217:2017(E) standard and covers the fuel
categories ISO-F-RMA 10 RMK 700. Additionally, the engine manufacturer has specified
the fuel specification “HFO 1”. This tighter specification is an alternative and by using a fuel
fulfilling this specification, longer overhaul intervals of specific engine components are
guaranteed (See the Engine Manual of a specific engine type).
HFO is accepted only for back-up fuel system. Use of HFO as pilot fuel is not allowed, but a
fuel quality fulfilling the MDF specification included in section Light fuel oil operation (distillate)
has to be used.
Table 6-6 Heavy fuel oils
Test method reference
Limit
HFO 2
Limit
HFO 1
UnitCharacteristics
-20 ± 420 ± 4
mm
2
/s
b)
Kinematic viscosity before main injection
pumps
d)
ISO 3104700,0700,0
mm
2
/s
b)
Kinematic viscosity at 50 °C, max.
ISO 3675 or ISO 12185
991,0 /
1010,0
a)
991,0 /
1010,0
a)
kg/m
3
Density at 15 °C, max.
ISO 8217870850-
CCAI, max.
f)
ISO 8754 or ISO 14596
Statutory require-
ments, but max.
4,50 % m/m
% m/m
Sulphur, max.
c, g)
ISO 271960,060,0°C
Flash point, min.
IP 5702,002,00mg/kg
Hydrogen sulfide, max.
ASTM D6642,52,5mg KOH/g
Acid number, max.
ISO 10307-20,100,10% m/m
Total sediment aged, max.
ISO 1037020,0015,00% m/m
Carbon residue, micro method, max.
ASTM D327914,08,0% m/m
Asphaltenes, max.
d)
ISO 30163030°C
Pour point (upper), max.
e)
ISO 3733 or ASTM
D6304-C
d)
0,500,50% V/V
Water, max.
ISO 3733 or ASTM
D6304-C
d)
0,300,30% V/V
Water before engine, max.
d)
ISO 6245 or LP1001
d, i)
0,1500,050% m/m
Ash, max.
IP 501, IP 470 or ISO
14597
450100mg/kg
Vanadium, max.
g)
IP 501 or IP 47010050mg/kg
Sodium, max.
g)
IP 501 or IP 4703030mg/kg
Sodium before engine, max.
d, g)
IP 501, IP 470 or ISO
10478
6030mg/kg
Aluminium + Silicon, max.
IP 501, IP 470 or ISO
10478
1515mg/kg
Aluminium + Silicon before engine, max.
d)
IP 501 or IP 470
IP 501 or IP 470
30
15
30
15
mg/kg
mg/kg
- Calcium, max.
h)
- Zinc, max.
h)
IP 501 or IP 5001515mg/kg
- Phosphorus, max.
h)
6-8 DBAD209883
Wärtsilä 46DF Product Guide6. Fuel System

Table of Contents

Related product manuals