See Fluidics System (Page 29) and the mass spectrometer's online Help for further details on
the fluidics system.
1.2 ACQUITY UPLC-MS Xevo TQ-S cronos systems
The Waters Xevo TQ-S cronos is compatible with ACQUITY UPLC systems. If you are not using
an ACQUITY UPLC system, refer to the documentation relevant to your LC system.
1.2.1 Compatible systems - Xevo TQ-S cronos
The Waters Xevo TQ-S cronos is compatible with the following ACQUITY UPLC systems:
• ACQUITY UPLC
• ACQUITY UPLC H-Class, H-Class PLUS, H-Class PLUS Bio, and H-Class PLUS Binary
• ACQUITY UPLC I-Class and I-Class PLUS
• ACQUITY Premier
• ACQUITY Arc and ACQUITY Arc Bio
• Arc Premier
The ACQUITY Xevo TQ-S cronos UPLC-MS system includes an ACQUITY UPLC, ACQUITY
UPLC H-Class, or ACQUITY UPLC I-Class, and the Waters Xevo TQ-S cronos fitted with the
ESI/APCI/ESCi source.
Note: ACQUITY system options can vary depending on the software used to operate the
instrument.
1.2.2 ACQUITY system core components
Core components for each ACQUITY system are listed below:
Table 1–1: ACQUITY system core components:
System Core components
ACQUITY UPLC • Binary solvent manager
• Sample manager
• Column heater
• UPLC detectors
• Solvent tray
1
In Waters documents, the term “fluidics” refers to the fluidics system, which is the instrument’s onboard system that delivers
sample and solvent to the probe of the mass spectrometer. It can also denote plumbing components and fluid pathways within and
between system modules.
January 10, 2022, 715006200 Ver. 01 (previously released as Rev. A)
Page 23
To Next Page
