Watlow 97 series - Page 6

Setup Steps
The controller must be equipped for communications,
(97_ _ - _ _ _ U - _ _ _ _ or 97_ _ - _ _ _ R - _ _ _ _).
See Chapter Five, Chapter Six and the Appendix.
4
Set up communications.
Chapter Four explains the keys, displays and software
navigation.
Chapter Five explains features, such as alarms and
control methods.
Chapter Six lists parameter descriptions, ranges,
Modbus numbers and other information.
3
Configure the controller for
your application.
See Chapter Three.
2
Wire the controller.
See Chapter Two.
1
Install the controller.
How to do itWhat to do
1.2 ■ Overview Watlow Series 97