Chapter Two
Installation
Figure 2.1 - Series 97 multiple panel cutout dimensions.
NOTE: Measurements between panel cutouts are the minimum recommended.
For rapid mounting, use Greenlee punch number 60020 and die number 60021, or hand hydraulic unit, kit number 7306,
all available from Grainger.
Panel Cutout
Panel
Thickness
0.06" to 0.38"
(1.5 to 9.7 mm)
1.77" to 1.79"
(44.96mm to 45.47mm)
1.77" to 1.79"
(44.96mm
to 45.47mm)
0.540"
(13.72mm)
Minimum
0.310"
(7.874mm)
2.050"
2.050"
234
LIMIT 97
1
RESET
Watlow Series 97 Installation ■ 2.1
2
To Next Page
Loading...
