• Additional text will expand below the warning, click the underlined text to go to the IP
Address. In Error! Reference source not found.5-3, this text is “Proceed to
10.40.50.94 (unsafe)”.
Figure 5-3: Warning Expanded Text
• When the login screen appears, put in the Username (default is “admin”) and the
Password (found on the label of the FieldServer).
NOTE:
There is also a QR code in the top right corner of the FieldServer label that shows the default
unique password when scanned.
Figure 5-4: Warning Expanded Text
NOTES:
A user has 5 attempts to login then there will be a 10-minute lockout. There is no timeout on
the FieldServer to enter a password.
To create individual user logins, go to 5.5 .
To Next Page
Loading...