DATE AND TIME
• Date format: allows you to choose the following date formats:
(dd-MM-YYYY, MM/dd/YYYY and YYYY-MM-dd)
• Date: allows to change the date of the system.
• Time: allows to change the time of the system.
GRAPHICS
• Zero based time plots: allow to scale the graph between 0 and the maximum
of the measurement or between the minimum and maximum to have a
precise view of the time variation of the eld.
• Graph timespan: sets the duration of the representation of the graph up to
12 min.
DISPLAY
• Language: sets the desired language.
• Adjust backlight automatically: if enabled the SMP2 will adjust backlight
depending on ambient light.
• Backlight level: if automatic adjustment is disabled, manual level can be
selected from 1 to 4 (4 is the brightest).
• Screensaver delay: denes the time before screen power off. When the
screensaver is active the instrument will not stop measuring. To exit the
screensaver just click any button.
SOUND
• Enable: enables or disables sound.
DEVICE
• Turn off after inactivity period: The instrument turns off after the specied
period of inactivity. (Activity may be communicating with PC, keyboard
pressing key). When log is activated, automatic turn off is disabled.
• System info: indicates the version of the SMP2 software. By clicking on OK,
you will have more information about the unit like disk space available.
• Factory reset: will erase all measurement data and restore conguration
parameters to factory settings.
User’s Manual Electromagnetic Field Meter SMP2 P. 32
To Next Page
Loading...
Need help?
General
