1. WARNINGS AND PRECAUTIONS
Review this manual and become familiar with all the instructions for using
and handling your SMP2.
Your SMP2 is a portable apparatus with a rechargeable battery. Before
taking any measurement, make sure that the battery is suciently charged
for the time that you need for the measurement. If it is not, recharge the
battery before.
Your SMP2 is not watertight and it should be protected from moisture, such
as rain.
Adjustment, maintenance or repair of the equipment must be performed
only by qualied personnel. Please get in touch with Wavecontrol or your
sales contact.
Never overtighten when screwing the SMP2 on the tripod since the thread
engagement could break down.
The SMP2 is a professional measurement device that must be calibrated to
ensure that it works properly. Check to make sure that its calibration is valid at
all times.
If your equipment has been calibrated according to ISO 17025, the calibration
report is valid only for the SMP2 and probe. The probe can, however, be used
with any other SMP2. The calibration report will not be valid if you switch the
probe.
If you are unsure or need to recalibrate, please contact your distributor or
contact us at service@wavecontrol.com (see section 10.3).
User’s Manual Electromagnetic Field Meter SMP2 P. 4
To Next Page
Loading...
Need help?
General
