DECLARATION OF CONFORMITY (DoC)
Manufacturer: Wavecontrol, S.L.
C/ Pallars, 65-71 · 08018 Barcelona (Spain)
Object of the declaration: SMP2 Electromagnetic Field Meter
The above mentioned product complies with the essential requirements, which
are specied in the 2004/108/EC Directive on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
The product of the declaration described above is in conformity with the
requirements of the following specications:
Documents-No. and description:
• IEC-EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use.
• EN 55011:2011 + A1:2011
Industrial, scientic and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement.
• IEC-EN 61000-3-2:2006 + A1:2010 + A2:2010
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current <= 16 A per phase).
• IEC-EN 61000-3-3:2009
Limitation of voltage changes, voltage uctuations and icker in public low-
voltage supply systems, for equipment with rated current <= 16 A per phase
and not subject to conditional connection.
• IEC-EN 61000-4-2:2010
Testing and measurement techniques - Electrostatic discharge immunity test.
• IEC-EN 61000-4-3:2007 + A1:2008 + A2:2011
Testing and measurement techniques- Radiated, radio-frequency,
electromagnetic eld immunity test.
• IEC-EN 61000-4-4:2005 + CORR:2010 + A1:2010
Testing and measurement techniques - Electrical fast transient/burst
immunity test.
User’s Manual Electromagnetic Field Meter SMP2 P. 91
To Next Page
Loading...
Need help?
General
