Waveshare RS485 TO ETH - READ THE BITS OF THE BYTE REGISTER

RS485 TO ETH
User can set RS485 TO ETH in UDP Server mode and related parameters by setup software or web
server as follows:
2.2.5. HTTPD CLIENT
In HTTPD Client mode, RS485 TO ETH can achieve data transmission between serial port device and
HTTP server. User just need set RS485 TO ETH in HTTPD Client and set the HTTPD header, URL and
some other related parameters, then can achieve data transmission between serial port device and
HTTP server and don’t need care about the HTTP format of data.
Figure 9 UDP Server