Name: Waveshare RS485 TO ETH
Brand: Waveshare
Rating: 5 (1 reviews)

To Next Page

To Previous Page

RS485 TO ETH

3. PARAMETER SETTING

There are three ways to configure RS485 TO ETH. They are setup software configuration, web server

configuration and AT command configuration.

3.1. SETUP SOFTWARE CONFIGURATION

User can download setup software from Waveshare Wiki. When user want to configure the RS485 TO

ETH by setup software, user can run setup software, search RS485 TO ETH in same LAN and configure

the RS485 TO ETH as follow:

After researching RS485 TO ETH and clicking RS485 TO ETH to configure, user need log in with user

name and password. Default user name and password both are admin. If user keep the default

parameters, it is not necessary to log in.

Figure 20 Setup Software

Other manuals for Waveshare RS485 TO ETH

Questions and Answers:

Need help?

Do you have a question about the Waveshare RS485 TO ETH and is the answer not in the manual?

General