wbox HD2s - Channel Status; A;V Output Settings; Languages

Chapter 5 >> Main Menu
26
Channel Status
This part of the menu can be used to view the channel parameters and signal status of the
currently tuned TV channel.
A/V Output Settings
1 Select A/V Output Settings using the Arrow (▲/▼) buttons on the Conguration menu
and press the OK button.
2 Select a setting to be modied using the Arrow (▲/▼) buttons and press the OK button.
3 Select a value for each setting using the Arrow (▲/▼) buttons and press the OK button.
Available values are listed below:
(1) TV Aspect Ratio: 16:9, 4:3, or Automatic
(2) Display Format (SCART): Fullscreen, Letterbox, or
Stretched
(3) Display Format (HDMI): Fullscreen, Letterbox, or
Stretched
(4) Digital Audio: Multichannel or Stereo
(5) S/PDIF A/V Sync: 0~250ms
(6) Preferred Audio Track: Normal, Hard of Hearing, or Visually Impaired
(7) SCART Signal Type: CVBS or RGB
(8) HDMI Video Format: Automatic, 576p, 720p, 1080i, or Original format
Languages
1 Select Languages using the Arrow (▲/▼) buttons on the Conguration menu and press
the OK button.
2 Select a language setting using the Arrow (▲/▼) buttons and press the OK button.
Available settings are listed below:
(1) Menu language
(2) Primary Audio Language
(3) Secondary Audio language
(4) Primary Subtitle Language
(5) Secondary Subtitle language
(6) Hard of Hearing Subtitles
3 Select a value for each language setting using the Arrow (▲/▼) buttons and press the OK
button.
M_180_DNA_HD-T63CX_ENG_120322_jte.indd 26 2012-03-22 �� 2:41:28