18 CF-4
- Turn the stop button (18/1) into the "START"
position.
- Push the speed adjusting lever (19/1) approx.
1/3 to the left.
- Turn the fuel stop cock (19/3) into its vertical
position to open it.
- Open or close the choke (19/2) according to the
engine and/or ambient temperature:
a) In case of a cold engine and/or low ambient
temperatures, totally close the choke (19/2).
(Choke to the left).
b) In case of a warm engine and/or high
ambient temperatures, open the choke (19/2)
half to all the way. (Choke to the right).
- Slowly pull the handle (21/1) of the reversible
starter (21/2) until a resistance is felt.
- Let the handle (21/1) recoil into its original
position and then firmly pull the cable with both
hands to start the engine.
Important!
If the engine should fail to start, repeat the
starting procedure.
- As soon as the engine starts, let the starter
cable recoil into its housing (21/2).
- Slowly bring the choke (19/2) into the fully open
position (choke to the right) and let the engine
idle to warm up.
Figure 18
Figure 19
Stop
Start
1
Figure 20
1
2
Figure 21
2.5.2 Starting, Robin Engine
2
1
3
closed
open
To Next Page
Loading...
