CF-4 19
- Turn the stop button (22/1) into the "START"
position.
- Push the fuel cock (23/1) into the "ON" position.
- Push the speed adjusting lever (23/2) approx.
1/3 to the left.
- In case of a cold engine and/or low ambient
temperatures, totally close the choke (23/3).
(Choke to the left).
- In case of a warm engine and/or high ambient
temperatures, open the choke (23/3) half to all
the way. (Choke to the right).
- Slowly pull the handle (24/1) of the reversible
starter (24/2) until a resistance is felt.
- Let the handle (24/1) recoil into its original
position and then firmly pull the cable with both
hands to start the engine.
Important!
If the engine should fail to start, repeat the
starting procedure.
- As soon as the engine starts, let the starter
cable recoil into its housing (24/2).
- Slowly bring the choke (23/3) into the fully open
position (choke to the right) and let the engine
idle to warm up.
3
1
Figure 22
Figure 23
Figure 24
2
3
1
Stop
Start
1
1
2
2.5.3 Starting, Honda Engine
To Next Page
Loading...
