Weber Genesis E-330 User Manual

WWW.WEBER.COM
9
GAS INSTRUCTIONS
INSTALLING THE CYLINDER
Purchase a Full Cylinder of Gas From your Gas Dealer
The cylinder must always be installed, transported and stored in an upright position.
Never allow the cylinder to drop or be handled carelessly. Never store the cylinder
where temperatures can exceed 51° C (too hot to hold by hand). For example, do not
leave the cylinder in your car on hot days. (Refer to: “SAFE HANDLING TIPS FOR LP GAS
CYLINDERS”).
Cylinder Bracket Installation
You will need: the cylinder brackets (1).
A) Open the grill cabinet. The cylinder brackets snap into the mounting holes in
the base panel as shown in the illustration (2). Insert cylinder bracket tabs into
rectangular slots. Secure in place by pivoting brackets down to lock centre tab in
place.
B) Lift and place the cylinder between the cylinder brackets (3) on the base panel. The
base of the cylinder must fit between the cylinder brackets (4).
C) Turn the cylinder so the valve opening faces the front of the grill.
Be sure that the cylinder brackets are installed in the base panel and that the base of
the cylinder fits within the cylinder brackets.
2
3
4
1

Weber Genesis E-330 Specifications

General

Device type	Wheels
Heat source	Natural gas
Total power	12300 W
Smoke function	No
Side burner power	3500 W
Dimensions (WxDxH)	2240 x 870 x 1640 mm
Adjustable thermostat	Yes
Side burners quantity	1
Number of cooking zones	4 zone(s)
Product color	Black
Housing material	Stainless steel
Top surface type	Grate
Cooking surface shape	Rectangular
Cooking surface (W x D)	660 x 500 mm
LED indicators	Temperature

Weight and Dimensions

Depth	870 mm
Width	2240 mm
Height	1640 mm
Weight	114000 g