Preheat setting,Language switching,Automatic shutdown and advanced function
can be set here.
Broken wire detection and LED color can be set in “Advanced function”
6.2.3. ADJUST
Level build plate
Nozzle gap adjustment
Press “Level build plate” in the “Adjust” menu, the printer will automatically level
the build plate. Please operate according to the screen tips and keep the build plate
in rising status until hearing the sounds, it means the leveling operation is
finished.Press the return button to the previous menu.
We have adjusted well the nozzle gap for new printers,so you do not need to do it
again. When you change a new nozzle, you need to adjust the nozzle gap. Please
refer to "daily maintenance " replace the nozzle "nozzle gap calibration".
To Next Page
Loading...
